Description
Features
- The Powermax30 XP is a highly portable plasma cutting system that can handle a wide range of applications.
- A unique “two-in-one” design provides high-power capability for thick metal cutting, as well as the FineCut consumables for detailed, thin metal cutting.
- The versatile 30-amp system uses air or nitrogen to cut electrically conductive metals, such as mild steel, stainless steel, or aluminum.
- System includes everything you need to get you cutting quickly and easily
- Small size and light weight let you take the Powermax30 XP just about anywhere
- Plug into any 120 or 240 V power (convenient Auto-Voltage technology and plug adapters included)
- Fast cutting speeds and excellent cut quality let you finish jobs quicker, with fewer secondary operations
- Built to withstand heavy-duty use in the most demanding environments
- “Two-in-one” design for maximum versatility
- High-power cutting on thick metal
- FineCut consumables enable high quality cuts on thin metal, leaving a clean edge and a narrow kerf
Applications
- For dragging the torch directly across the work piece - Drag cutting
- Extended reach cutting - For improved visibility & accessibility when cutting in confined spaces
- Extended reach gouging - For improved visibility & accessibility when gouging in confined spaces
- For narrow kerf width with minimal dross and heat affected zone - Fine feature cutting
Specifications
- Input voltages: 120-240 V, 1-PH, 50/60 Hz
- Input current @ 3.8 kW: 120-240 V, 1-PH, 25-18.8 A
- Output current: 15-30 A
- Rated output voltage: 125 VDC
- Duty cycle @ 40°C (104°F): 35%, 240 V | 20%, 120 V
- Open circuit voltage (OCV): 256 VDC
- Gas Supply: Clean, dry, oil-free air or nitrogen
- Recommended gas inlet flow rate / pressure: 113.3 l/min (4 scfm) at 5.5 bar (80 psi)
- Input power cable length: 3 m (10')
- Power supply type: Inverter - IGBT
- Engine drive requirement: 5.5 kW for full 30 A output
Shop General Air Service & Supply for all your Equipment needs!
